These tubing stops are made to quickly add stoppers to any peristaltic tubing. They are the best solution to get sterilizable custom tubing with stoppers, or longer tubing sets.
Pack of 20 units.
General
Quickly and easily make a custom peristaltic tubing with stoppers by sliding these slip-on stops over your tubing.
While mounted stoppers are glued and melt when autoclaved, the slip-on stops can be removed for tubing sterilization.
These slip-on stops are compatible with several pump heads with cassettes (DG, DG15, MC, MS/CA, Click'n'go). They also accommodate a wide range of tubing sizes, including Ismatec extension tubes for peristaltic pumps.
| Color |
Dimensions |
Compatible extension tubing sizes |
Compatible tubing sizes (Longer) |
| Black |
1.5 mm ID x 6.0 mm OD |
0.25 to 1.02 mm ID
|
0.5 mm ID x 2.1 mm OD (0.8 mm WT)
|
| Blue |
2.0 mm ID x 6.0 mm OD |
1.14 to 1.65 mm ID |
1/0 mm ID x 3.0 mm OD (1 mm WT) |
| Red |
2.8 mm ID x 6.8 mm OD |
2.06 to 2.54 mm ID |
2.0 mm ID x 4.0 mm OD (1 mm WT)
13#: 0.8 mm ID x 4.2 mm OD (1.7 mm WT)
|
| Yellow |
3.5 mm ID x 7.5 mm OD |
2.79 mm ID
|
3.0 mm ID x 5.0 mm OD (1 mm WT)
14#: 1.6 mm ID x 5.0 mm (1.7 mm WT)
|
Mounting the slip-on stop on a tubing
- Insert tweezers into the tube stop
- Open the tweezers to enlarge the tube stop so that the tubing can slide easily
- Slide the tubing to the desired position and remove the tweezers
- Repeat the operation to make 2-stop or 3-stop custom tubes
Tip: the spacing between each stopper on standard Ismatec/Masterflex tubing is 73 mm (2.9") for 3-stop and 153 mm (6.1") for 2-stop.
Content
20x Slip-on stops
