Peristaltic Pump Accessories

The SS304 Barbed Sink Head is a durable fitting designed to add weight to soft-walled tubing, ensuring it remains submerged at the bottom of a reservoir. It is available in three sizes for tubing...

This cable easily connects RS485 interfaces to USB ports for the external control of our pumps. General Use this 1.8 m cable to connect your RS485 pump to a computer. Combine it with the External...

Cartridge to be used in Innofluid AMC pump heads. General These replacement cartridges are compatible with Innofluid AMC pump heads. They are used to hold the tubing in place within the peristaltic...

RS-232 to USB cable for Longer pumps. General Operate your Longer pumps through your computer using this RS-232 to USB cable. Content 1x RS-232 to USB cable for Longer pumps Documentation

RS-485 to RS-232 adapter for Longer pumps. To be used with the RS-232 to USB Cable for Longer Pumps to interface them to a computer USB port. General Operate your Longer pumps thro

Pump-to-PC cable for Innofluid pumps to interface their peristaltic pumps to a RS-485 port, and program them from your computer. If your computer lacks an RS-485 port or if you'd prefer not to use...

Replacement films for Fluid Pulse Dampers, a device used to smooth out peristaltic oscillations. Available in packs of 5 and different sizes, made of silicone or FKM. General Enhance the performance...

Pump-to-PC cable for Innofluid pumps to interface their peristaltic pumps to a RS-232 port, and program them from your computer. If your computer lacks an RS-232 port or if you'd prefer not to use...

USB to RS-232 and RS-485 adapter for Innofluid pumps to interface them to a computer USB port. To be used with the Pump to PC RS-232 Cable or t

Specifically designed for peristaltic pumps, this damper reduces flow pulsation in microfluidic systems. This general-use damper is available for different tubing sizes. General Use this damper to...

Spacer to be used to assemble DG pump heads. General Use this spacer to assemble Longer DG peristaltic pump heads.   Content 1x Spacer

Cartridge to be used in Longer DG pump heads. General Manufactured in POM, these replacement cartridges are compatible with DG pump heads. They are used to hold the tubing in place within the...

A connector to create your own cable for Masterflex drives. General A 7.9 m (25 ft) cable with a terminal connector and stripped wire ends. Verify the connector type on your drive before ordering...

A cable assembly to connect your Masterflex drive to any device. General A 7.9 m (25 ft) cable with a terminal connector and stripped wire ends. Verify the connector type on your drive before...

Control your Masterflex drive with this footswitch for washdown-compatible pumps. General A footswitch for start/stop operation to keep your hands free while operating the pump. Content 1x Footswitch...

Control your Masterflex drive with this footswitch. General A footswitch for start/stop operation to keep your hands free while operating the pump. Content 1x Footswitch for Masterflex...

Cartridges for Masterflex L/S Multichannel Cartridge pump heads, small or large versions available to accommodate your tubing size. General Cartridge for L/S Multichannel Cartridge pump head with...

Easily stack multiple Easy-Load II pump heads on your Masterflex L/S drive. General Mounting hardware for Masterflex L/S Easy-Load II pump heads. Manufactured in stainless steel, it allows to replace...

Easily stack multiple Easy-Load or Standard pump heads on your Masterflex L/S drive. General Mounting hardware for Masterflex L/S Easy-Load or Standard pump heads. Manufactured in stainless steel, it...

A synchronization cable to create complex workflows using two New Era pumps. General This cable establishes communication between two RS-2332 ports on any New Era pump (except InfusionONE) for...

Control your Longer peristaltic pump externally, in voltage, current, frequency, or RS485. Compatible with most Longer pump drivers, the following modules are available: 0-5 V, 0-10 V, 4-20 mA, 0-10...

Pump-to-pump cable for daisy-chaining of New Era pumps. General Daisy-chain two or more New Era pumps to connect your pump network to a single computer. Available in 7 ft. (2.13 m) and 25 ft. (7.62...

SyringePumpPro takes control of your standalone or OEM pumps: connect one or more pumps to your computer, and automatically monitor all pump parameters without having to enter any commands...

A footswitch to trigger your standard or OEM New Era syringe pump. General Start, stop or trigger the next step of your syringe pump Attaches to the TTL logic port of your syringe pump Easy to...