Pumps

The NE-4000 SyringeTWO is a two-channel programmable syringe pump for a wide range of applications: the SyringeTWO can generate flow rates typically from 23.9 nL/min to 100.3 mL/min. The SyringeTWO...

The NE-1000 New Era SyringeOne is a single-channel programmable syringe pump for a wide range of applications: in its standard version, the SyringeONE can generate flow rates typically between 12.12...

Control independently the direction and speed of up to four independent channels using the Reglo ICC peristaltic pump, each with its own program: start, stop, dispense, reverse, aspirate, and...

Get the closest of your microfluidic chip with these reservoirs! This is particularly useful when you need to work with very low flow rates and low volumes. General Minimize your system's internal...

High-precision split type syringe pump with one controller and separate syringe pumps (up to 8 units) for various lab applications from 0.01 µL/min to 127 mL/min. Embedding a 7" color LCD touch...

Work easily and with the best accuracy thanks to the infusion/withdrawal ISPLab syringe pump! Its large LCD touch screen is really convenient to control the pump during your microfluidics experiments...

The Harvard Apparatus 33 DDS Dual Independent Channel Syringe Pump is a multi-purpose syringe pump has two independent pumping channels controlled by an intuitive touch screen interface. Embedding...

A versatile and autoclavable rack to hold up to 4 independent tubes: 1.5 mL Eppendorf (XS), 15 mL Falcon (S), 50 mL Falcon (M). This holder allows a convenient and sturdy setup with microfluidic...

A syringe pump with infusion/withdrawal mode and a convenient LCD screen.  Available in 1 to 12-channel versions, this pump can generate flow rates from 0.001 µL/min to 22 mL/min with high precision...

Flow rate peristaltic pump with 4.3" LCD touch screen with dispensing and fixed volume modes. Made in laboratory-grade ABS, this pump is easy to use and can reach flow rates down to a few µL/min at a...

An 8-bar lubricated compressor for lab purposes. Operates at a low noise level (35 dB) in a powerful and compact format.  General  This air compressor is generally used as a pressure source for...

The MUX Distributor is the perfect solution to automate the sequential injection of reagents during a microfluidic experiment. Switch between up to 12 liquids quickly and easily and create automated...

The Harvard Apparatus PHD ULTRA Programmable Syringe Pump is a high-accuracy advanced syringe pump capable of running up to 10 syringes at the same time. This pump represents the latest technology in...

A precision peristaltic pump with 4 up to 24 parallel channels from 2 µL/min. A graphic LCD screen displays either rpm or flow and facilitates quick and easy control of the pump. Silicone tubing is...

A particle and water filter for any pressure source. General Prevent debris, particulates, and water coming from your pressure source (compressor, air line, etc…) from entering the pressure supply...

A set of hydrophobic filters to prevent water from coming into your pressure controller. General These hydrophobic filters prevent water from passing through them, acting as a liquid blocker, and...

Add some flow resistance to your flow path. This kit contains a PEEK capillary tubing, acting as a flow resistance, and the necessary accessories to interface it with your system (tubing cutter,...

A toolset to connect a compressor or vacuum pump to any pneumatic system. General Connect a compressor, vacuum pump or air line to your setup, for example an Elveflow OB1 or AF1. All-in-one...

The Harvard Apparatus 11 Pico Plus Elite Microfluidic programmable infusion/withdrawal syringe pump represents the best choice when your experiment requires the lowest flow and the highest accuracy...

A set of 4 Viton fluorocarbon rubber replacement gaskets for use with Eppendorf (1.5 mL) and Falcon (15 mL or 50 mL) reservoirs. General Battered and flattened by daily manipulations, life is not...

Customize your microfluidic pressure system with 4 mm or 6 mm pneumatic tubing and pneumatic connectors to extend and multiply your pressure distribution. General Distribute the air pressure coming...

This versatile autoclavable microfluidic adapter allows the use of (included) 50 mL BD Falcon tubes in microfluidic systems using standard 1/4-28 fittings interfaced with any pressure source to...

This versatile autoclavable microfluidic adapter allows the use of (included) 15 mL BD Falcon tubes in microfluidic systems using standard 1/4-28 fittings interfaced with any pressure source to...

This versatile autoclavable microfluidic adapter allows the use of (included) XS Eppendorf tubes (1.5 mL) in microfluidic systems using standard 1/4-28 fittings interfaced with any pressure source...