Pumps

The NE-8000 SyringeONE:200 is a single-channel programmable syringe pump for high pressures. In this version, the SyringeONE:200 can generate flow rates up to 340.6 mL/min, and delivers the highest...

The NE-1010 SyringeONE:100 is a single-channel programmable syringe pump for a wide range of applications. In this High-Pressure version, the SyringeONE:100 has a stronger motor than the standard...

The NE-1002X SyringeONE:Microfluidics is one of the smoothest single-channel syringe pumps for microfluidics applications: in this low flow rate version, this syringe pump goes down to 0.13 pL/min...

Use the mp-valvedriverM to control the Memetis BV 1101 valves from the Multiboard. General The mp-valvedriverM is a driver used to control Memetis BV 1101 valves on the Bartels Multiboard and...

Upgrade solution for the PHD ULTRA Syringe Pump from Harvard Apparatus for multiple syringes control. If you already own a compatible pump, this rack is sold as an upgrade. When purchased together...

The Harvard Apparatus PHD ULTRA Infusion Only Syringe Pump is a high-accuracy syringe pump capable of running up to 10 syringes at the same time. This pump represents the latest technology in syringe...

A foot switch to trigger your Standard, OEM, or Pump Modules for HAPC from Harvard Apparatus. General Start, stop or trigger the next step of your syringe pump Attaches to the 3.5 mm Phono port of...

The Harvard Apparatus PHD ULTRA Push/Pull syringe pump module is the best choice for continuous flow applications. PHD ULTRA pumps have superior mechanical drive mechanisms and syringe holding...

The Harvard Apparatus PHD ULTRA Standard Pump Module for HAPC is the best choice for demanding applications. Harvard Apparatus PHD ULTRA syringe pumps have superior drive and syringe holding...

Upgrade for the Harvard Apparatus Pump Controller (HAPC) to control up to 4 pump modules. General Allows you to control more Pump Modules on the Harvard Apparatus

An oil-free and compact vacuum source for various laboratory applications. It is designed to be used with the Elveflow OB1 pressure controller. General The Elveflow Vacuum Source is a compact and...

The Harvard Apparatus Pump Controller (HAPC) is a standalone controller for the operation of up to four pumping channels, either separately or simultaneously. Through its touch screen interface, the...

Bartels mp-Driver controller is a compact pump driver for BP7 and mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be adjusted easily (frequency,...

The mp-Multiboard2 evaluation board is the new version of the mp-Multiboard. Easily control your whole setup from the Multiboard2: up to six BP7 or mp6 Bartels micropumps, flow sensors, pressure...

A laboratory peristaltic pump to cover a wide range of applications, from 2 µL/min to 366.7 mL/min. This is the updated version of the BT100-2J. You can choose between two pump head types depending...

Step-down transformer from 220V to 110V, used with the New Era Heating Kit. General A step-down transformer to be used with the Heating Kit from New Era in countries where the voltage is above 120V.

Additional heating pads, to be used with the Syringe Heater Kit. Available in two versions: 1LG (9 x 7.5 cm / 3.5" x 3.0") or 5SP (50 x 1.5 cm / 20" x 0.625"). General Heat multiple syringes from one...

Heat your syringes and control their temperature up to 185 °C! This kit includes a control unit and a primary syringe heater pad to heat one syringe. Available in two versions: 1LG (9 x 7.5 cm / 3.5"...

The mp-advance Evaluation Set is the most complete bundle to use Bartels product line for a wide range of applications. The set contains 1x mp-Multiboard2 controller with 4 driver chips (Lowdriver,...

A mounting frame for BP7 and mp6 micropumps. General Insert a BP7 or mp6 micropump in this mounting frame to easily fix the pump in your integrated system. Content 1x mp-mf mounting frame for Bartels...

Use the mp-valvedriverT to control the Takasago SMV-2R-BN1F from the Multiboard or Multiboard2. General The mp-valvedriverT is a driver used to control Takasago SMV-2R-BN1F valves on the Bartels Multi

A shape-memory alloy valve from Takasago, fully integrated with the Bartels Multiboard2 system (with the mp-valvedriverT). General Takasago SMV is an almost-silent and low-power 2/2 normally closed...

The mp-basic Evaluation Set is the easiest and most efficient way to try out Bartels micropumps. It includes the mp-Multiboard2 which can be operated simply from the provided software. The set...

Memetis ECU-S is a simple control unit for quick evaluation of Memetis valves. General The Memetis ECU-S is the simplest controller for controlling one 2/2 NC Memetis valve.  Features For one...