Essentials

The Liquid Storage Tanks by Microfluidic ChipShop, with a 500 µL capacity, are designed to seamlessly fit female Luer ports of ChipShop and other compatible microfluidic chips. Available in opaque or...

PEEK Y connector with standard 1/4-28 UNF connection ports for 1/16" OD or 1/8" OD tubing. Available with or without 1/4-28 fittings. General The design of Y connectors reduces turbulence in the flow...

A pressure-proofed reservoir for high-pressure microfluidic applications up to 8 bar. Manufactured in PTFE, the cap ensures a secured connection between the glass bottle and your microfluidic...

BD Plastipak Luer Lock disposable syringes in polypropylene or polycarbonate for general lab applications. These syringes can also be used with syringe pumps in any microfluidic system. 1 mL, 3 mL, 5...

These syringes have barrels and plungers manufactured with #316 stainless steel to offer you high resistance to pressures, temperatures, and highly corrosive chemicals. The included O'Rings in Viton...

FluoSurf is an emulsion stabilizer in fluorinated oil specifically formulated for droplet-based microfluidic applications, such as single-cell analysis. Biocompatible, it is highly stable even with...

Standard sealing tape in PTFE to be used with microfluidic connectors, ensuring a leak-free connection of your microfluidic setup. 12 meters roll, width of 12 mm, and thickness of 0.1 mm. General Use...

Get the closest of your microfluidic chip with these reservoirs! This is particularly useful when you need to work with very low flow rates and low volumes. General Minimize your system's internal...

Merge or split microfluidic flows with this T-junction manifold: the three outputs allow for multi-functional use as either a flow splitter or flow combiner. This assembly comes complete with 1/4-28...

Merge or split up to 4 microfluidic flows using this 5-port PEEK manifold with PEEK fittings and ETFE ferrules for 1/16" or 1/8" OD tubing. General This PEEK Manifold Assembly can be easily used as a...

Merge or split up to 5 microfluidic flows using this 6-port manifold with 1/4-28 PEEK fittings and ferrules for 1/16" OD or 1/8" OD tubing. General This PEEK Manifold Assembly can be easily applied...

Merge or split up to 6 microfluidic flows using this 7-port manifold. Optional 1/4-28 PEEK fittings and ETFE ferrules for 1/16" OD or 1/8" OD tubing. General This PEEK Manifold Assembly can be easily...

Merge or split microfluidic flows with this T-junction manifold: the three outputs allow for multi-functional use as either a flow splitter or flow combiner. This assembly comes complete with...

Merge or split microfluidic flows with this Cross Assembly manifold: the four outputs allow for multi-functional use as a flow splitter or flow combiner. Optional 1/4-28 fittings for 1/16" OD or 1/8"...

A versatile and autoclavable rack to hold up to 4 independent tubes: 1.5 mL Eppendorf (XS), 15 mL Falcon (S), 50 mL Falcon (M). This holder allows a convenient and sturdy setup with microfluidic...

A particle and water filter for any pressure source. General Prevent debris, particulates, and water coming from your pressure source (compressor, air line, etc…) from entering the pressure supply...

A set of hydrophobic filters to prevent water from coming into your pressure controller. General These hydrophobic filters prevent water from passing through them, acting as a liquid blocker, and...

A set of color dyes to visualize your microfluidics flows. General Visualize your flows in a microfluidic chip with this set of food dyes. These water-based concentrates can be used to easily...

Additional hydrophobic PTFE membranes for bubble traps. Sold in a pack of 5. General Replacement PTFE membranes for bubble trap in in-line bubbles removal protocols (bubble trap not included)...

23G stainless steel connectors to connect your tubing to your PDMS microfluidic chips, perfect for use with 0.5 mm ID silicone or Tygon microfluidic tubing. Reusable and easily installable...

A set of 4 Viton fluorocarbon rubber replacement gaskets for use with Eppendorf (1.5 mL) and Falcon (15 mL or 50 mL) reservoirs. General Battered and flattened by daily manipulations, life is not...

Merge or split up to 12 microfluidic flows using this 13-port manifold, supporting 1/4-28 microfluidic fittings. General A manifold with 13 1/4-28 ports to evenly split or merge your liquid/airflow...

An easily installable and infinitely reusable microfluidic valve to quickly stop a flow or inject a sample.  Compatible with standard 1/4-28 microfluidic fittings. General Inject a microfluidic...

This versatile autoclavable microfluidic adapter allows the use of (included) 50 mL BD Falcon tubes in microfluidic systems using standard 1/4-28 fittings interfaced with any pressure source to...