Essentials

The Fluo-Break solution is an emulsion breaker from Emulseo. It is specifically developed to disrupt droplets that were stabilized with FluoSurf. Supplied in a glass vial of 10 mL. General The...

One-way check valves for various applications, such as protecting your microfluidic system against backflows. These valves have a low cracking pressure (15 mbar = 0.217 psi) to be performant even at...

Clamps for tubing up to 1.5 mm OD. Pack of 100 units. General A pack of 100 open jaw slide clamps for flexible tubing up to 1.5 mm OD. Manufactured in polypropylene (PP). Content 100x Open jaw slide...

FluoSurf is an emulsion stabilizer in fluorinated oil specifically formulated for droplet-based microfluidic applications, such as single-cell analysis. Biocompatible, it is highly stable even with...

Molex connectors for custom-made cabling of Bartels BP7 and mp6 micropumps. Pack of 10 units. General Connect any BP7 or mp6 micropump to your control board with these Molex connectors. Content 10x...

A bubble trap to remove bubbles from water-based solutions while using Bartels micropumps. General Remove bubbles from your flow stream using Bartels micropumps. The bubble trap must be used with a...

An inline filter with 10 µm mesh to prevent particles from damaging your HNP micro annular gear pump. Manufactured in 316L stainless steel or alloy C22, with seals in Kalrez or EPDM to ensure the...

A passive check valve to prevent backflows when your Bartels BP7 or mp6 micropump is switched off. General Prevent your liquid from flowing back when your Bartels BP7 or mp6 micropump is turned off...

Secure the connection between your tubing and your BP7 or mp6 micropump to prevent leakages. Pack of 10 units. General Hose clamps for Bartels BP7 and mp6 micropumps, prevent any unwanted...

Protect your Bartels micropumps from dust and particles, filter porosity 20 - 60 µm. General Protect your fluidic systems from particles by connecting this filter upstream of your Bartels micropump...

The mp-damper is made to reduce pulsations in the flow generated by the Bartels BP7 and mp6 micropumps. General Get a more even flow rate by reducing its pulsatility! The mp-damper was designed to...

This 10-32 x 10-32 non-metallic check valve protects against backflows. Broad chemical resistance and biocompatibility are guaranteed by the PEEK polymer and fluoroelastomer construction. The low...

These 1/4-28 x 10-32 non-metallic check valves provide excellent protection against backflows. Broad chemical resistance and biocompatibility are guaranteed by the PEEK polymer and fluoroelastomer...

These 1/4-28 non-metallic check valves provide excellent protection against backflows. Broad chemical resistance and biocompatibility are guaranteed by the PEEK polymer and fluoroelastomer...

Prevent backflows in your flow stream with this inline cartridge check valve. Mounted downstream a sensitive instrument, it ensures that your liquid flows in one direction only. 1/4-28 flat-bottom...

Replacement frits for inline filters, manufactured in PCTFE and PEEK. Filter pore size of 0.5 µm or 2 µm. Sold in packs of 5 units. General A set of replacement frits in PCTFE/PEEK for inline filters...

Inline filters are used to prevent your microfluidic chip from being clogged because of particles in your liquids. These filters, manufactured in PEEK, are fully biocompatible and can be mounted...

Quickly stop the flow of a stream with this manual shut-off valve. Manufactured in biocompatible PEEK and ETFE, it is resistant to most chemicals. 2x PEEK fittings and ETFE ferrules included...

With these 90° stainless steel bent connectors, connect your tubing to your PDMS microfluidic chips while keeping clear the area above your chip. This is particularly useful when using a microscope,...

Stainless steel connectors to connect your tubing to your PDMS microfluidic chips, perfect for use with silicone or Tygon microfluidic tubing. Reusable and easily installable. General Make a reliable...

Hamilton Gastight glass syringes with female 1/4-28 UNF tip in PEEK for easy connection to threaded fittings. 1/4-28 fittings are often used in microfluidics for connecting rigid tubing (PTFE, FEP,...

This autoclavable bubble trap is a simple yet effective device to remove the bubbles in your flow stream. Manufactured in PEEK, its body is entirely autoclavable and biocompatible. Available in 3...

Get the most out of your syringe pump! Hamilton Gastight glass syringes are well known for their quality, allowing to dispense low flows with a high accuracy. Available from 25 µL to 50 mL, with Luer...

Thanks to their colorless, odorless, and biocompatible properties, fluorinated oils are widely used in microfluidics for droplet applications. Fluo-Oil 40, based on Fluorinert 40, and Fluo-Oil 7500,...