Browse By Application

This 360 µm OD capillary PEEK tubing is highly resistant, biocompatible, and chemically inert. Available in 4 different inner diameters. General PEEK tubing is compatible with aggressive solvents and...

A foot switch to trigger your Standard, OEM, or Pump Modules for HAPC from Harvard Apparatus. General Start, stop or trigger the next step of your syringe pump Attaches to the 3.5 mm Phono port of...

The Harvard Apparatus PHD ULTRA Push/Pull syringe pump module is the best choice for continuous flow applications. PHD ULTRA pumps have superior mechanical drive mechanisms and syringe holding...

The Harvard Apparatus PHD ULTRA Standard Pump Module for HAPC is the best choice for demanding applications. Harvard Apparatus PHD ULTRA syringe pumps have superior drive and syringe holding...

1/32” OD PEEK tubing for your most demanding and ultra low flow applications. Available with 5 different inner diameters and 3 different lengths. General This 1/32” OD capillary tubing is made of...

Upgrade for the Harvard Apparatus Pump Controller (HAPC) to control up to 4 pump modules. General Allows you to control more Pump Modules on the Harvard Apparatus

Resistant to high pressure, these Super Flangeless ferrules are adapted to 1/4-28 UNF flat-bottom ports and are made to connect 1/16” OD tubing. Sold in packs of 10 ferrules. General Super Flangeless...

This pressure relief valve prevents system over-pressurization by diverting the flow when inline pressure exceeds 5 psi. General Pressure relief valves ensure the protection of your components by...

These Fluidic 1223 male Luer plugs are designed to seal female Luer ports on microfluidic chips. Sold in packs of 10 plugs. General These male Luer plugs close unused female Luer ports on your...

Fluidic 302 is a pack of female Luer Lock connectors to be fixed on microfluidic chips. Sold in packs of 10 ports. General These female Luer Lock ports are made for chip prototyping. They can be...

These Fluidic 1262 caps preserve female Mini Luer interfaces from evaporation and contamination. Sold in packs of 10 caps. General These polypropylene (PP) caps allow sealing Mini Luer interfaces...

These Fluidic 1231 flat caps are made to seal female Luer interfaces. Sold in packs of 10 caps. General These TPE caps allow sealing Luer interfaces without additional height to the microfluidic...

These Fluidic 1230 flat caps seal female Mini Luer interfaces. Sold in packs of 10 caps. General These TPE caps allow sealing Mini Luer interfaces with a minimal footprint. Content 10x Female mini...

Peristaltic tubing in platinum-cured silicone for various applications. Three stoppers are glued on each tube to be used with LongerPump DG series peristaltic pump heads. Ultra smooth and...

A 15 m roll of Biosicon high-performance and biocompatible tubing, designed and manufactured for GMP pharmaceutical and life science applications. This platinum-cured silicone tubing meets USP Class...

A 15 m roll of platinum-cured silicone tubing for general lab applications and peristaltic pumping. Translucent, ultra-smooth inner bore and wide chemical compatibility. Available in various sizes,...

The Harvard Apparatus Pump Controller (HAPC) is a standalone controller for the operation of up to four pumping channels, either separately or simultaneously. Through its touch screen interface, the...

Honeywell ABP digital pressure sensor with cable for Bartels Multiboard2. Pressure range from 0 to 15 psi (0 to 1 bar), accuracy of 0.25% (see documentation). General Honeywell ABP series are...

Bartels mp-Driver controller is a compact pump driver for BP7 and mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be adjusted easily (frequency,...

A kit of PEEK fittings for connecting 1/16" OD rigid tubing with 10-32 threaded ports. These fittings are reusable and can be used for the distribution of both liquids and pneumatic pressure (i.e...

These conical adapters connect capillary peristaltic tubing to standard 1/16" OD tubing. The adapter accommodates peristaltic tubing IDs from 0.020” (0.50 mm) to 0.030” (0.75 mm). General This...

Extend your 2-stop or 3-stop peristaltic tubing thanks to this extension roll of Tygon E-Lab. It is available in the same dimensions as Tygon E-Lab tubing with stoppers, which allows perfect...

NanoTight sleeves are designed to adapt 630 to 670 µm OD tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly...

NanoTight sleeves are designed to adapt 555 to 595 µm OD capillary tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit...